Alpina’s tuned 3 Series models gain subtle design changes, power boost and latest iDrive system.
The Alpina B3 and Alpina D3 S have been updated in line with arrival of the facelifted BMW 3 Series, which was revealed by the German car maker last week.
Both cars gain a boost in power, aerodynamic improvements, a revised exterior design and new technical software.
The updated Alpina B3 is powered by a 3.0-litre in-line six-cylinder engine with an output of 359kW – an improvement of 24kW over the previous car.
Torque is also uprated by 30Nm to 730Nm. The reserves are channelled through an eight-speed automatic transmission.
The B3 sedan covers 0-100km/h in 3.6sec and wagon-bodied Alpina B3 Touring completes the sprint in 3.7secs. Top speed stands at 305km/h.
Alpina’s D3 S, meanwhile, uses a 3.0-litre straight-six diesel engine with mild-hybrid technology supported by a 48V starter-generator, which, Alpina says, improves throttle response and efficiency.
It has 4kW more than the previous version, at 265kW, and generates 730Nm of torque. The D3 S sedan takes 4.6sec to dispatch 0-62mph and the Alpina D3 S Touring 4.8sec. The D3 S can reach a top speed of 270km/h.
Both cars receive various exterior design changes, including additional components at the front and the rear to improve aerodynamics.
Inside, each model is equipped with a 14.9-inch curved display, along with a digital driver’s display and BMW’s eighth-generation iDrive system.
Details for Australia are yet to be confirmed.
Jack Warrick